Dongguan Senkong Electronic Technology Co., Ltd
Dongguan Senkong Electronic Technology Co., Ltd
Add to Cart
FR4 PCB Sheet 111ma White LED Human Induction Lamp PCBA Circuit Board For Kitchen
Specification
| PCB size |
34*20*1mm |
| Output (load) | 0.5W |
| PCB sheet | FR4 |
| Output drive type: | MOS type |
| Control board output |
light source |
| Screen printing color | black |
| Input and output interface type: | 3 section No. 7 dry battery input, output LED board soldered to the board pad |
| Induction distance | about 3 meters |
| Board type, quantity: | Single panel |
| White LEDs are connected in parallel, the maximum current | 111ma |
Operation instruction
Note: When the battery is purchased or reinstalled, and the battery is initially powered on, it will only enter the working state after about 1 minute of power-on initialization time. During the initialization time, there will be the following possible phenomena:
1. Just put on the battery, it will not work for about 1 minute in a dark environment, but when it can be sensed, after the light works, it will enter the work standby state at this time, it can start induction work, this phenomenon is normal.
2. As soon as the battery is installed, the light may automatically turn on. At this time, do not go to induction. Wait until the light is off, and then enter the standby working state to start induction work. This phenomenon is normal.
3. The above two phenomena appear at the same time within 1 minute, do not go to induction at this time, wait for 1 minute before entering the standby working state, you can start induction work, this phenomenon is normal.
Quality Control
Application
Such as: bedrooms, bookcases, wardrobes, kitchens, toilets, baby cabins, utility rooms, and even car trunks and other places that need lighting.