Dongguan Senkong Electronic Technology Co., Ltd
Dongguan Senkong Electronic Technology Co., Ltd
Add to Cart
120° Induction 30-51uA Human Induction Lamp PCBA Circuit Board For Wardrobes
Specification
| PCB size thickness | 34*20*1mm |
| Screen printing color |
Black |
| Application | utility rooms, and even car trunks |
| Output (load) | 0.5W |
| Whether the output power can be increased depends on what | Determined by current limiting resistor and lamp beads |
| Standby current | 30-51uA |
| Accessories | main control IC, voltage regulator IC, human body sensor head, light sensitive head. |
This product uses a control mode that combines human body induction and light control induction. It can accurately sense human body activities in a dark environment and automatically turn on. After turning on the light for 30 seconds, it automatically turns off. When it senses human activity again, it turns on again.
Feature
1. LED soft light treatment, no stroboscopic;
2. Intelligent light control and human activity sensing;
Note: When the battery is purchased or reinstalled, and the battery is initially powered on, it will only enter the working state after about 1 minute of power-on initialization time. During the initialization time, there will be the following possible phenomena:
1. Just put on the battery, it will not work for about 1 minute in a dark environment, but when it can be sensed, after the light works, it will enter the work standby state at this time, it can start induction work, this phenomenon is normal.
2. As soon as the battery is installed, the light may automatically turn on. At this time, do not go to induction. Wait until the light is off, and then enter the standby working state to start induction work. This phenomenon is normal.
3. The above two phenomena appear at the same time within 1 minute, do not go to induction at this time, wait for 1 minute before entering the standby working state, you can start induction work, this phenomenon is normal.
Guarantee