Dongguan Senkong Electronic Technology Co., Ltd
Dongguan Senkong Electronic Technology Co., Ltd
Add to Cart
DC002 Power Interface Foot Massager PCBA Circuit Board Touch Key MOS Tube
Specification
| full charging time | 10 hours |
| Input power | 5V2A |
| Battery type | lithium battery |
| Number and type of boards | Two, one motherboard, one power board |
| battery capacity | 52000mAh |
| charging time | 7.2 hours |
| Input/output interface type | DC002 power interface, two boards with FPC wiring terminal, output with PH2.0-2A terminal |
Measurement accuracy requirements: Battery capacity, three grid display, no special requirements. When opening high-power parts, such as heating plate, the power display should be stable, not affected by the low power of the battery.
Man-machine interface display: 19 LED, all patch 0603. The colors are emerald green, blue, red and yellow. Power level 3 (emerald green, blue, red), time level 3 (emerald green, blue, red). Breathing lamp yellow, red, red, blue, emerald green. Three power indicator lights are red, fan, LED, heating and plasma are red.
Parameter
There is no corresponding heating plate and fan in hand for testing.
The parameters and current of air bag and valve are the same as 1100
| The battery voltage |
Single air bag pressure protection (Open a valve, the air pump will not open) |
Double air bag pressure protection (Open two valves, the air pump will not open) |
Single air bag charging (Open a valve and air pump) |
Double air bag charging (Open two valves and air pump) |
| 4.2V(Full recharge) | 350ma | 630ma | 650-790ma | 950-1100ma |
| 3.3V(Low electricity) | 280ma | 510ma | 540-710ma | 830-900ma |
Quality Control
1st : 100% Raw material quality control
2nd : 100% inspection after assembling
3rd : 100% aging test
4th: 100% quality inspection on packing lines
5th : sample inspection
before delivery Our defective rateis nearly 0% before shipment and lower than 0.3%after shipments.
Package
1. Anti-static bubble film shall be used for packaging and packing after piecing together
2. Matters needing attention when packing
1) Considering the force comprehensively, the direction set up after PCBA packing should be the same as that of corrugated carton
2) Avoid the collision between PCBas during packaging; Appropriate placement and bubble film thickness should be selected.